Steel Guard Nanocoat

Steel Guard Nanocoat™”, is an Inorganic, water based Anti-Rust Compound. It conforms to the RoHS Directive and is Non- Evaporative, Non-Inflammable Liquid. “Steel Guard Nanocoat™” is a unique, ready to use, water based Rust Preventing Compound. It Prevents Rust & Corrosion by acting at a Molecular Level of the steel surface and completely restores it to rust-free condition. In addition, “Steel Guard Nanocoat™” also increases the bonding strength to the applied material between 100% - 300%, thus giving it an extended strength & life in construction. It is based on Nano-Technology, wherein one thin layer of ‘0.2’ (Zero) microns acts at a molecular level stopping the formation of Fe2 & Fe3 ions (i.e. Rust). It penetrates into the surface of steel forming Dense Micro Crystals (D.M.C.) between the molecules of Iron within the surface and not above it, retaining the original Properties of the Steel. Steel Guard Nanocoat™” is water based rust preventer which makes the applied surface rust & corrosion free. It has a much superior performance and provides much greater life & durability to the metal over other solvent based primers even in high salt based corrosive conditions. “Steel Guard Nanocoat™” leads to a longer, durable life of expensive machinery & equipment by protecting it from rust, thereby avoiding huge maintenance & replacement cost. The Bonding & Adhesion strength increases by 100% to 300% after using “Steel Guard Nanocoat™”. It prolongs the life to a multi paint system because of its better bonding, curing, reforming and barrier properties as compared to other conventional primers making it a unique product in its category. Since “Steel Guard Nanocoat™” is a water based solution, its viscosity is very low (1.035) which leads to a much higher coverage leading to huge reductions in cost. Also since one layer is sufficient, it makes “Steel Guard Nanocoat™”extremely cost effective & economical. TMT bars treated with “Steel Guard Nanocoat TM” are free from corrosion. “Steel Guard Nanocoat TM” is a revolutionary invention based on Nanotechnology (Micro Crystal Development Technology) wherein it works at the molecular level by penetrating inside the pores of the surface. It creates a Dense Crystal Formation (Frost) protective layer consisting of millions of nuclei. This layer acts as a barrier between the applied surface and atmosphere stopping the formation of Fe2 & Fe3 ions, which are the main agents of corrosion. The Crystal layer thus formed is so closely interlinked & interwoven that it does not allow water & gas to penetrate inside. This phenomenon prevents corrosion and ultimate result in an increase in the bonding strength of steel with concrete. The detailed reasons for are mentioned below: Simultaneously, billions of nuclei are formed on the surface and micro crystals start growing around them. This forms a very tenacious attachment with the sub stratum resulting in a formation of highly complex crystalline structure on the steel surface. Another important reason for the increase in the bonding strength by more than 300% is Nanocoat's physiochemical structure, due to which the active chemical formulation hides the dense forest of micro crystals inside and form a chemical net which attracts minute cement particles. This forms a strong bond between steel & cement.

Steel guard nanocoat™”, is an inorganic, water based anti-rust compound. It conforms to the rohs directive and is non- evaporative, non-inflammable liquid. “steel guard nanocoat™” is a unique, ready to use, water based rust preventing compound. It prevents rust & corrosion by acting at a molecular level of the steel surface and completely restores it to rust-free condition. In addition, “steel guard nanocoat™” also increases the bonding strength to the applied material between 100% - 300%, thus giving it an extended strength & life in construction. It is based on nano-technology, wherein one thin layer of ‘0. 2’ (zero) microns acts at a molecular level stopping the formation of fe2 & fe3 ions (i. E. Rust). It penetrates into the surface of steel forming dense micro crystals (d. M. C. ) between the molecules of iron within the surface and not above it, retaining the original properties of the steel. Steel guard nanocoat™” is water based rust preventer which makes the applied surface rust & corrosion free. It has a much superior performance and provides much greater life & durability to the metal over other solvent based primers even in high salt based corrosive conditions. “steel guard nanocoat™” leads to a longer, durable life of expensive machinery & equipment by protecting it from rust, thereby avoiding huge maintenance & replacement cost. The bonding & adhesion strength increases by 100% to 300% after using “steel guard nanocoat™”. It prolongs the life to a multi paint system because of its better bonding, curing, reforming and barrier properties as compared to other conventional primers making it a unique product in its category. Since “steel guard nanocoat™” is a water based solution, its viscosity is very low (1. 035) which leads to a much higher coverage leading to huge reductions in cost. Also since one layer is sufficient, it makes “steel guard nanocoat™”extremely cost effective & economical. Tmt bars treated with “steel guard nanocoat tm” are free from corrosion. “steel guard nanocoat tm” is a revolutionary invention based on nanotechnology (micro crystal development technology) wherein it works at the molecular level by penetrating inside the pores of the surface. It creates a dense crystal formation (frost) protective layer consisting of millions of nuclei. This layer acts as a barrier between the applied surface and atmosphere stopping the formation of fe2 & fe3 ions, which are the main agents of corrosion. The crystal layer thus formed is so closely interlinked & interwoven that it does not allow water & gas to penetrate inside. This phenomenon prevents corrosion and ultimate result in an increase in the bonding strength of steel with concrete. The detailed reasons for are mentioned below: simultaneously, billions of nuclei are formed on the surface and micro crystals start growing around them. This forms a very tenacious attachment with the sub stratum resulting in a formation of highly complex crystalline structure on the steel surface. Another important reason for the increase in the bonding strength by more than 300% is nanocoat's physiochemical structure, due to which the active chemical formulation hides the dense forest of micro crystals inside and form a chemical net which attracts minute cement particles. This forms a strong bond between steel & cement.

Steel guard nanocoat™”, is an inorganic, water based anti-rust compound. It conforms to the rohs directive and is non- evaporative, non-inflammable liquid. “steel guard nanocoat™” is a unique, ready to use, water based rust preventing compound. It prevents rust & corrosion by acting at a molecular level of the steel surface and completely restores it to rust-free condition. In addition, “steel guard nanocoat™” also increases the bonding strength to the applied material between 100% - 300%, thus giving it an extended strength & life in construction. It is based on nano-technology, wherein one thin layer of ‘0. 2’ (zero) microns acts at a molecular level stopping the formation of fe2 & fe3 ions (i. E. Rust). It penetrates into the surface of steel forming dense micro crystals (d. M. C. ) between the molecules of iron within the surface and not above it, retaining the original properties of the steel. Steel guard nanocoat™” is water based rust preventer which makes the applied surface rust & corrosion free. It has a much superior performance and provides much greater life & durability to the metal over other solvent based primers even in high salt based corrosive conditions. “steel guard nanocoat™” leads to a longer, durable life of expensive machinery & equipment by protecting it from rust, thereby avoiding huge maintenance & replacement cost. The bonding & adhesion strength increases by 100% to 300% after using “steel guard nanocoat™”. It prolongs the life to a multi paint system because of its better bonding, curing, reforming and barrier properties as compared to other conventional primers making it a unique product in its category. Since “steel guard nanocoat™” is a water based solution, its viscosity is very low (1. 035) which leads to a much higher coverage leading to huge reductions in cost. Also since one layer is sufficient, it makes “steel guard nanocoat™”extremely cost effective & economical. Tmt bars treated with “steel guard nanocoat tm” are free from corrosion. “steel guard nanocoat tm” is a revolutionary invention based on nanotechnology (micro crystal development technology) wherein it works at the molecular level by penetrating inside the pores of the surface. It creates a dense crystal formation (frost) protective layer consisting of millions of nuclei. This layer acts as a barrier between the applied surface and atmosphere stopping the formation of fe2 & fe3 ions, which are the main agents of corrosion. The crystal layer thus formed is so closely interlinked & interwoven that it does not allow water & gas to penetrate inside. This phenomenon prevents corrosion and ultimate result in an increase in the bonding strength of steel with concrete. The detailed reasons for are mentioned below: simultaneously, billions of nuclei are formed on the surface and micro crystals start growing around them. This forms a very tenacious attachment with the sub stratum resulting in a formation of highly complex crystalline structure on the steel surface. Another important reason for the increase in the bonding strength by more than 300% is nanocoat's physiochemical structure, due to which the active chemical formulation hides the dense forest of micro crystals inside and form a chemical net which attracts minute cement particles. This forms a strong bond between steel & cement.

Steel guard nanocoat™”, is an inorganic, water based anti-rust compound. It conforms to the rohs directive and is non- evaporative, non-inflammable liquid. “steel guard nanocoat™” is a unique, ready to use, water based rust preventing compound. It prevents rust & corrosion by acting at a molecular level of the steel surface and completely restores it to rust-free condition. In addition, “steel guard nanocoat™” also increases the bonding strength to the applied material between 100% - 300%, thus giving it an extended strength & life in construction. It is based on nano-technology, wherein one thin layer of ‘0. 2’ (zero) microns acts at a molecular level stopping the formation of fe2 & fe3 ions (i. E. Rust). It penetrates into the surface of steel forming dense micro crystals (d. M. C. ) between the molecules of iron within the surface and not above it, retaining the original properties of the steel. Steel guard nanocoat™” is water based rust preventer which makes the applied surface rust & corrosion free. It has a much superior performance and provides much greater life & durability to the metal over other solvent based primers even in high salt based corrosive conditions. “steel guard nanocoat™” leads to a longer, durable life of expensive machinery & equipment by protecting it from rust, thereby avoiding huge maintenance & replacement cost. The bonding & adhesion strength increases by 100% to 300% after using “steel guard nanocoat™”. It prolongs the life to a multi paint system because of its better bonding, curing, reforming and barrier properties as compared to other conventional primers making it a unique product in its category. Since “steel guard nanocoat™” is a water based solution, its viscosity is very low (1. 035) which leads to a much higher coverage leading to huge reductions in cost. Also since one layer is sufficient, it makes “steel guard nanocoat™”extremely cost effective & economical. Tmt bars treated with “steel guard nanocoat tm” are free from corrosion. “steel guard nanocoat tm” is a revolutionary invention based on nanotechnology (micro crystal development technology) wherein it works at the molecular level by penetrating inside the pores of the surface. It creates a dense crystal formation (frost) protective layer consisting of millions of nuclei. This layer acts as a barrier between the applied surface and atmosphere stopping the formation of fe2 & fe3 ions, which are the main agents of corrosion. The crystal layer thus formed is so closely interlinked & interwoven that it does not allow water & gas to penetrate inside. This phenomenon prevents corrosion and ultimate result in an increase in the bonding strength of steel with concrete. The detailed reasons for are mentioned below: simultaneously, billions of nuclei are formed on the surface and micro crystals start growing around them. This forms a very tenacious attachment with the sub stratum resulting in a formation of highly complex crystalline structure on the steel surface. Another important reason for the increase in the bonding strength by more than 300% is nanocoat's physiochemical structure, due to which the active chemical formulation hides the dense forest of micro crystals inside and form a chemical net which attracts minute cement particles. This forms a strong bond between steel & cement.

Steel guard nanocoat™”, is an inorganic, water based anti-rust compound. It conforms to the rohs directive and is non- evaporative, non-inflammable liquid. “steel guard nanocoat™” is a unique, ready to use, water based rust preventing compound. It prevents rust & corrosion by acting at a molecular level of the steel surface and completely restores it to rust-free condition. In addition, “steel guard nanocoat™” also increases the bonding strength to the applied material between 100% - 300%, thus giving it an extended strength & life in construction. It is based on nano-technology, wherein one thin layer of ‘0. 2’ (zero) microns acts at a molecular level stopping the formation of fe2 & fe3 ions (i. E. Rust). It penetrates into the surface of steel forming dense micro crystals (d. M. C. ) between the molecules of iron within the surface and not above it, retaining the original properties of the steel. Steel guard nanocoat™” is water based rust preventer which makes the applied surface rust & corrosion free. It has a much superior performance and provides much greater life & durability to the metal over other solvent based primers even in high salt based corrosive conditions. “steel guard nanocoat™” leads to a longer, durable life of expensive machinery & equipment by protecting it from rust, thereby avoiding huge maintenance & replacement cost. The bonding & adhesion strength increases by 100% to 300% after using “steel guard nanocoat™”. It prolongs the life to a multi paint system because of its better bonding, curing, reforming and barrier properties as compared to other conventional primers making it a unique product in its category. Since “steel guard nanocoat™” is a water based solution, its viscosity is very low (1. 035) which leads to a much higher coverage leading to huge reductions in cost. Also since one layer is sufficient, it makes “steel guard nanocoat™”extremely cost effective & economical. Tmt bars treated with “steel guard nanocoat tm” are free from corrosion. “steel guard nanocoat tm” is a revolutionary invention based on nanotechnology (micro crystal development technology) wherein it works at the molecular level by penetrating inside the pores of the surface. It creates a dense crystal formation (frost) protective layer consisting of millions of nuclei. This layer acts as a barrier between the applied surface and atmosphere stopping the formation of fe2 & fe3 ions, which are the main agents of corrosion. The crystal layer thus formed is so closely interlinked & interwoven that it does not allow water & gas to penetrate inside. This phenomenon prevents corrosion and ultimate result in an increase in the bonding strength of steel with concrete. The detailed reasons for are mentioned below: simultaneously, billions of nuclei are formed on the surface and micro crystals start growing around them. This forms a very tenacious attachment with the sub stratum resulting in a formation of highly complex crystalline structure on the steel surface. Another important reason for the increase in the bonding strength by more than 300% is nanocoat's physiochemical structure, due to which the active chemical formulation hides the dense forest of micro crystals inside and form a chemical net which attracts minute cement particles. This forms a strong bond between steel & cement.

Steel guard nanocoat™”, is an inorganic, water based anti-rust compound. It conforms to the rohs directive and is non- evaporative, non-inflammable liquid. “steel guard nanocoat™” is a unique, ready to use, water based rust preventing compound. It prevents rust & corrosion by acting at a molecular level of the steel surface and completely restores it to rust-free condition. In addition, “steel guard nanocoat™” also increases the bonding strength to the applied material between 100% - 300%, thus giving it an extended strength & life in construction. It is based on nano-technology, wherein one thin layer of ‘0. 2’ (zero) microns acts at a molecular level stopping the formation of fe2 & fe3 ions (i. E. Rust). It penetrates into the surface of steel forming dense micro crystals (d. M. C. ) between the molecules of iron within the surface and not above it, retaining the original properties of the steel. Steel guard nanocoat™” is water based rust preventer which makes the applied surface rust & corrosion free. It has a much superior performance and provides much greater life & durability to the metal over other solvent based primers even in high salt based corrosive conditions. “steel guard nanocoat™” leads to a longer, durable life of expensive machinery & equipment by protecting it from rust, thereby avoiding huge maintenance & replacement cost. The bonding & adhesion strength increases by 100% to 300% after using “steel guard nanocoat™”. It prolongs the life to a multi paint system because of its better bonding, curing, reforming and barrier properties as compared to other conventional primers making it a unique product in its category. Since “steel guard nanocoat™” is a water based solution, its viscosity is very low (1. 035) which leads to a much higher coverage leading to huge reductions in cost. Also since one layer is sufficient, it makes “steel guard nanocoat™”extremely cost effective & economical. Tmt bars treated with “steel guard nanocoat tm” are free from corrosion. “steel guard nanocoat tm” is a revolutionary invention based on nanotechnology (micro crystal development technology) wherein it works at the molecular level by penetrating inside the pores of the surface. It creates a dense crystal formation (frost) protective layer consisting of millions of nuclei. This layer acts as a barrier between the applied surface and atmosphere stopping the formation of fe2 & fe3 ions, which are the main agents of corrosion. The crystal layer thus formed is so closely interlinked & interwoven that it does not allow water & gas to penetrate inside. This phenomenon prevents corrosion and ultimate result in an increase in the bonding strength of steel with concrete. The detailed reasons for are mentioned below: simultaneously, billions of nuclei are formed on the surface and micro crystals start growing around them. This forms a very tenacious attachment with the sub stratum resulting in a formation of highly complex crystalline structure on the steel surface. Another important reason for the increase in the bonding strength by more than 300% is nanocoat's physiochemical structure, due to which the active chemical formulation hides the dense forest of micro crystals inside and form a chemical net which attracts minute cement particles. This forms a strong bond between steel & cement.

Steel guard nanocoat™”, is an inorganic, water based anti-rust compound. It conforms to the rohs directive and is non- evaporative, non-inflammable liquid. “steel guard nanocoat™” is a unique, ready to use, water based rust preventing compound. It prevents rust & corrosion by acting at a molecular level of the steel surface and completely restores it to rust-free condition. In addition, “steel guard nanocoat™” also increases the bonding strength to the applied material between 100% - 300%, thus giving it an extended strength & life in construction. It is based on nano-technology, wherein one thin layer of ‘0. 2’ (zero) microns acts at a molecular level stopping the formation of fe2 & fe3 ions (i. E. Rust). It penetrates into the surface of steel forming dense micro crystals (d. M. C. ) between the molecules of iron within the surface and not above it, retaining the original properties of the steel. Steel guard nanocoat™” is water based rust preventer which makes the applied surface rust & corrosion free. It has a much superior performance and provides much greater life & durability to the metal over other solvent based primers even in high salt based corrosive conditions. “steel guard nanocoat™” leads to a longer, durable life of expensive machinery & equipment by protecting it from rust, thereby avoiding huge maintenance & replacement cost. The bonding & adhesion strength increases by 100% to 300% after using “steel guard nanocoat™”. It prolongs the life to a multi paint system because of its better bonding, curing, reforming and barrier properties as compared to other conventional primers making it a unique product in its category. Since “steel guard nanocoat™” is a water based solution, its viscosity is very low (1. 035) which leads to a much higher coverage leading to huge reductions in cost. Also since one layer is sufficient, it makes “steel guard nanocoat™”extremely cost effective & economical. Tmt bars treated with “steel guard nanocoat tm” are free from corrosion. “steel guard nanocoat tm” is a revolutionary invention based on nanotechnology (micro crystal development technology) wherein it works at the molecular level by penetrating inside the pores of the surface. It creates a dense crystal formation (frost) protective layer consisting of millions of nuclei. This layer acts as a barrier between the applied surface and atmosphere stopping the formation of fe2 & fe3 ions, which are the main agents of corrosion. The crystal layer thus formed is so closely interlinked & interwoven that it does not allow water & gas to penetrate inside. This phenomenon prevents corrosion and ultimate result in an increase in the bonding strength of steel with concrete. The detailed reasons for are mentioned below: simultaneously, billions of nuclei are formed on the surface and micro crystals start growing around them. This forms a very tenacious attachment with the sub stratum resulting in a formation of highly complex crystalline structure on the steel surface. Another important reason for the increase in the bonding strength by more than 300% is nanocoat's physiochemical structure, due to which the active chemical formulation hides the dense forest of micro crystals inside and form a chemical net which attracts minute cement particles. This forms a strong bond between steel & cement.

Steel guard nanocoat™”, is an inorganic, water based anti-rust compound. It conforms to the rohs directive and is non- evaporative, non-inflammable liquid. “steel guard nanocoat™” is a unique, ready to use, water based rust preventing compound. It prevents rust & corrosion by acting at a molecular level of the steel surface and completely restores it to rust-free condition. In addition, “steel guard nanocoat™” also increases the bonding strength to the applied material between 100% - 300%, thus giving it an extended strength & life in construction. It is based on nano-technology, wherein one thin layer of ‘0. 2’ (zero) microns acts at a molecular level stopping the formation of fe2 & fe3 ions (i. E. Rust). It penetrates into the surface of steel forming dense micro crystals (d. M. C. ) between the molecules of iron within the surface and not above it, retaining the original properties of the steel. Steel guard nanocoat™” is water based rust preventer which makes the applied surface rust & corrosion free. It has a much superior performance and provides much greater life & durability to the metal over other solvent based primers even in high salt based corrosive conditions. “steel guard nanocoat™” leads to a longer, durable life of expensive machinery & equipment by protecting it from rust, thereby avoiding huge maintenance & replacement cost. The bonding & adhesion strength increases by 100% to 300% after using “steel guard nanocoat™”. It prolongs the life to a multi paint system because of its better bonding, curing, reforming and barrier properties as compared to other conventional primers making it a unique product in its category. Since “steel guard nanocoat™” is a water based solution, its viscosity is very low (1. 035) which leads to a much higher coverage leading to huge reductions in cost. Also since one layer is sufficient, it makes “steel guard nanocoat™”extremely cost effective & economical. Tmt bars treated with “steel guard nanocoat tm” are free from corrosion. “steel guard nanocoat tm” is a revolutionary invention based on nanotechnology (micro crystal development technology) wherein it works at the molecular level by penetrating inside the pores of the surface. It creates a dense crystal formation (frost) protective layer consisting of millions of nuclei. This layer acts as a barrier between the applied surface and atmosphere stopping the formation of fe2 & fe3 ions, which are the main agents of corrosion. The crystal layer thus formed is so closely interlinked & interwoven that it does not allow water & gas to penetrate inside. This phenomenon prevents corrosion and ultimate result in an increase in the bonding strength of steel with concrete. The detailed reasons for are mentioned below: simultaneously, billions of nuclei are formed on the surface and micro crystals start growing around them. This forms a very tenacious attachment with the sub stratum resulting in a formation of highly complex crystalline structure on the steel surface. Another important reason for the increase in the bonding strength by more than 300% is nanocoat's physiochemical structure, due to which the active chemical formulation hides the dense forest of micro crystals inside and form a chemical net which attracts minute cement particles. This forms a strong bond between steel & cement.

Steel guard nanocoat™”, is an inorganic, water based anti-rust compound. It conforms to the rohs directive and is non- evaporative, non-inflammable liquid. “steel guard nanocoat™” is a unique, ready to use, water based rust preventing compound. It prevents rust & corrosion by acting at a molecular level of the steel surface and completely restores it to rust-free condition. In addition, “steel guard nanocoat™” also increases the bonding strength to the applied material between 100% - 300%, thus giving it an extended strength & life in construction. It is based on nano-technology, wherein one thin layer of ‘0. 2’ (zero) microns acts at a molecular level stopping the formation of fe2 & fe3 ions (i. E. Rust). It penetrates into the surface of steel forming dense micro crystals (d. M. C. ) between the molecules of iron within the surface and not above it, retaining the original properties of the steel. Steel guard nanocoat™” is water based rust preventer which makes the applied surface rust & corrosion free. It has a much superior performance and provides much greater life & durability to the metal over other solvent based primers even in high salt based corrosive conditions. “steel guard nanocoat™” leads to a longer, durable life of expensive machinery & equipment by protecting it from rust, thereby avoiding huge maintenance & replacement cost. The bonding & adhesion strength increases by 100% to 300% after using “steel guard nanocoat™”. It prolongs the life to a multi paint system because of its better bonding, curing, reforming and barrier properties as compared to other conventional primers making it a unique product in its category. Since “steel guard nanocoat™” is a water based solution, its viscosity is very low (1. 035) which leads to a much higher coverage leading to huge reductions in cost. Also since one layer is sufficient, it makes “steel guard nanocoat™”extremely cost effective & economical. Tmt bars treated with “steel guard nanocoat tm” are free from corrosion. “steel guard nanocoat tm” is a revolutionary invention based on nanotechnology (micro crystal development technology) wherein it works at the molecular level by penetrating inside the pores of the surface. It creates a dense crystal formation (frost) protective layer consisting of millions of nuclei. This layer acts as a barrier between the applied surface and atmosphere stopping the formation of fe2 & fe3 ions, which are the main agents of corrosion. The crystal layer thus formed is so closely interlinked & interwoven that it does not allow water & gas to penetrate inside. This phenomenon prevents corrosion and ultimate result in an increase in the bonding strength of steel with concrete. The detailed reasons for are mentioned below: simultaneously, billions of nuclei are formed on the surface and micro crystals start growing around them. This forms a very tenacious attachment with the sub stratum resulting in a formation of highly complex crystalline structure on the steel surface. Another important reason for the increase in the bonding strength by more than 300% is nanocoat's physiochemical structure, due to which the active chemical formulation hides the dense forest of micro crystals inside and form a chemical net which attracts minute cement particles. This forms a strong bond between steel & cement.